CP6110PASED 1" Drive Impact Wrench

Heavy Duty - D Handle - Twin Lobe Clutch
Working torque: 1695 Nm
Ultimate Torque: 2575 NM

CP9561RS 3/4" Drive Impact Wrench

General Duty - Pistol Handle - Pin Clutch
Working torque: 100 to 680 NM
Ultimate torque: 1020 NM

CP0614GASED 11/2 Drive Impact Wrench

Heavy Duty - D Handle - 2-Jaw Clutch
Working torque: 1620 to 3250 NM
Ultimate torque: 5420 NM

C0315RAGUL Reversible Drill

22 mm Drilling capacity - #2 MT Socket - 350 RPM

KC624-7 Die Grinder

600 Watt - 6mm Collet - 24,000 r.p.m.
Also available in speeds of 15,000, 19,000 & 28,000 r.p.m.

K260B6 Straight Grinder

2,000 Watt - 6,000 r.p.m. - 150mm Wheel capacity

K360B6 Straight Grinder

2,700 r.p.m - 6,000 r.p.m. - 150mm Wheel capacity

KL265B9 Vertical Grinder

2,200 Watt - 6,500 r.p.m. - 230 capacity

KL365B9 Vertical Grinder

2,700 Watt - 6,500 r.p.m - 230mm capacity

Electrical Tools

IPWE 520 RQ Impact Wrench from Milwaukee

Features

• Heavy duty high torque 3/4" Impact Wrench
• Electronic variable speed with sped dial giving maximum control to the user
• Softgrip and ergonomic handle design for a comfortable handling
• Quik-lok cable for quick and easy cable changing if needed, reduces downtime, increases productivity

Technical Data

Milwaukee Electrical Tools

PB 32 B Chipper and Breaker

Particularly suitable for heavy duty break-up work in closed rooms, where exhaust air (e.g. from compressors) posses problems.

Technical data

• Power input - 2200 W
• Blow energy - 59.9 J
• Blow rate - 1400 bpm
• Weight - 32.5 kg

PD2-18/Z Percussion Drill

Heavy duty 700 watt, 2 speed percussion drill.
Metal gear-box with plastic shoe for exact seating of bearings and gears.

Technical data

• Power input - 700 W
• Drill Ø in concrete / stone / steel / wood - 18 / 18 / 13 / 40 mm
• Torque - 24 Nm
• Full load speed (1st gear / 2nd gear) - 950 / 2250 rpm
• Chuck (keyed) Z1.5 - 13 mm
• Working radius - 32 mm
• Weight - 2.2 kg

• Max. diam. broaching capacity - 42 mm
• Max. depth broaching capacity - 50 mm
• Max. drilling (solid) capacity - 16 mm
• Motor power - 1200 W
• Static stalling torque - 50 Nm
• Magnetic holding power (at drill point pressure) - 10000 N
• Speed, no load - 300 - 640 rpm
• Speed, full load - 170 - 330 rpm
• Weight - 11,5 kg

D2E Diamond Drill

High performance dry diamond drill wih two gear steps.
Dual protection from the interlinked mechanical and electronic clutches.
Robust construction with metal gearbox.
Safe handling from the extended side handle and 'D' shaped back handle.

ASE 1400 Dust Extraction Unit

Commercial wet / dry absorption designed for connection to power tools.
Powerful 1400 watt 2 step motor.
Automatic, electromagnetic filter cleaning system
Socket with automatic on / off switch when used in connection to power tools
Filter material tested to BIA category C
Water resistant polyester filter
Variable suction power

Technical data

• Power input max. - 1400 W
• Air volume - 3660 l/min
• Max. vacuum - 50 - 248 mbar
• Container capacity - 50 l
• Filter surface - 2 x 4300cm²
• Tube diameter - 35 mm
• Weight - 16 kg

PIW 18 Special Application Tool

18 Volt (1/2) square drive impact wrench easily removes tightens lug nuts on vehicle tyres.
2.4 Ah Nicad batteries deliver maximum run time.
Reversible battery pack.
Variable speed switch.
Soft grip handle.
1/2" pin / detent socket retainer holds sockets and adapters more securely.

Technical data

• Battery pack voltage / capacity - 18 V / 2.4 Ah
• Impacts - 0 2200 ipm
• No load speed - 0 - 1400 rpm
• Torque - 325 Nm
• Drive shank square - 1/2"
• Length - 11.8 mm
• Weight - 4.1kg

PMS 18 / 0 Special Application Tool

18 Volt metal cutter ideal for cutting cable trays.
Superior balance
Electric brake for quick stops
3200 rpm for fast cutting
Soft grip handle
All-metal upper and lower guards

Technical data

• Battery pack voltage (not standard eqiupment) - 18 V / 2.4 Ah
• No load - 3200 rpm
• Blade size - 165 / 16 mm
• Cutting depth 90° - 0-54 mm
• Weight with battery pack - 5.6 kg

AGV 16-180 QXC 150 - 180 mm Grinders

Very compact and lowweight 180 mm grinder, offering 58mm cutting depth.
Fast stock removal.
Often an attractive alternative to a 2-hand machine, especially in many continous sanding and cutting applications.

Technical data

• Power input - 1520 W
• Disc diameter - 180 mm
• No load speed - 7600 rpm
• Spindle thread - M 14
• Cutting depth max. - 58.0 mm
• Weight - 2.2 kg

AG 12-125 X

Compact barrel-grip, 1200 watt, 125 mm angle grinder.
Snap lock guard
Spindle lock
Keyless FIXTEC flange nut
Lock-on switch

Technical data

• Power input - 1200 W
• Disc diameter - 125 mm
• No load speed - 11,000 rpm
• Spindle thread - M14
• Cutting depth max. - 33.0 mm
• Weight - 2.0 kg

AEG Electrical Tools

AEG product range includes:

• Rotary and demolition hammers
• Battery Tools
• Percussion Drills
• Jig Saws
• Grinders / Wall Chasers

The latest innovation includes:

• Anti-vibration system
• Safety clutch
• Softgrip
• Fully insulated metal gearbox housings
• Planetary gears
• PBS 3000 complete professional battery system